Omnisistem PR XL 1500 Wash User Manual

XL WASH 1500 PR-2805/PR-2805M This product manual contains important information about the safe installation and use of this projector.

10/22 ERROR MESSAGES In the course of launch, XL WASH 1500 examines automatically whether there are errors and if there are, it will display informa

11/22 DMX PROTOCOL Short mode Standard mode Extended mode FUNCTION DMX DESCRIPTION 1 1 1 Strobe 000-010 Black 011-025 Open 026-225 Strobe speed

12/22 140-145 Rainbow rotation speed 3 146-151 Rainbow rotation speed 4 152-157 Rainbow rotation speed 5 158-163 Rainbow rotation speed 6 164-169

13/22 188-195 Stop in current position 196-201 Rainbow reverse rotation speed 1(slowest) 202-207 Rainbow reverse rotation speed 2 208-213 Rainbow r

14/22 LED INDICATION Green On DMX signal OK Off No DMX signal Flash DMX signal error Yellow On Setting the panel Blue On Power Red/Green Red Running

15/22 TROUBLESHOOTING PROBLEM ACTION The projector doesn’t switch on ¾ Check the fuse on the power socket. ¾ Replace the lamp. The lamp comes on b

16/22 TECHNICAL DATA VOLTAGES: Electronical ballest(PR-2805): 200/220/230/240V AC，50/60Hz Options: Magenetic ballest(PR-2805M

17/22 HEAD MOVEMENT: Pan 450º, Tilt 270º with auto position correction BEAM ANGLE: 10°narrow angle mode 15°～42° CONTROL: DMX512, 3 pin, 5 pin inte

18/22 SIZES: See at below 548755448238453535505 LIGHT OUTPUT: 343015202704.436.6318.57254302380170097307604230953021440 53602014.855.303.55107.432.6

SENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MOTOR6SLAVE #1 PCBSENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MO

2/22 INDEX SAFE USAGE OF THE PROJECTOR 3 INSTALLING THE PROJECTOR 4 FITTING THE LAMP 4 POWER SUPPLY – MAINS 5 CONTROL CONNECTIONS 5 DMX TERMINATOR

SENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MOTOR6SLAVE #1 PCBSENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MO

21/22 COMPONENT ORDER CODES NAME PART NO. QUANTITY REMARK POWER SUPPLY 190010098 1 24V MAINS FILTER 193020008 1 20A 115/250VAC THERMOSTAT 1900

22/22 PR LIGHTING LTD. 1582 Xingye Avenue, Nancun Panyu Guangzhou, 511442 China TEL: +86-20-3995 2888 FAX: +86-

3/22 SAFE USAGE OF THE PROJECTOR When unpacking and before disposing of the carton check there is no transportation damage before using the projecto

4/22 INSTALL THE PROJECTOR (2PCS)(2PCS)HANDLES(2PCS)SAFETY CORDCLAMPS To pass 2 SAFETY CORDSthrough 4 HOLES for safety!WARNING257106 Take 2 clamps

5/22 POWER SUPPLY-MAINS Connect the power cord as follows: L (live) =brown E (earth) =yellow/green N (neutral) =blue Use the plug provided to connec

6/22 DMX TERMINATOR In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents

7/22 OPERATION MENU 1st LEVEL 2nd LEVEL 3rd LEVEL 4th LEVEL PR LIGHTING XL SERIES XL 1500 WASH DMX Address=001 DMX Address DMX Address00

8/22 ONCMY Invert CMYInvertOFF CMYInvertON CTO Invert CTO InvertOFF CTO InvertON Defaults DefaultsOFF DefaultsRestore Defaults Display Options Displa

9/22 Test Modes Factory Setup Factory SetupOFF Factory SetupON Self Test Self TestOFF self testON Lamp Manual Control Lamp Status Status = XXXControl