Introduction
Thank you for purchasing Magic Box Wide Beam. Magic Box Wide Beam is a 1
channel DMX laser can be controlled via a standard DMX controller. It is a
lightweight, mini intelligent fixture and is an ideal product for discos, clubs, exhibitions
and any place that need visionary effect. For safe operation, read this manual
before powering or installing the fixture, follow the safety precautions listed below, and
observe all warnings printed in this manual and on the fixture.
Safety Precautions
Do not spill liquids into or onto your unit. If this ever happens, disconnect the main
power immediately. Do not connect this unit to any dimmer pack.
Always disconnect from main power before making any type of connection.
Be sure to locate this unit in a place with adequate ventilation at least 15 cm from a
wall, and mount this unit in safe and stable matter.
To prevent fire or shock hazard, do not expose this unit to a high temperature or
high humidity area. Please unplug unit when not in use.
Always keep combustible materials away from the fixture.
Class 3B laser should be mounted at or above 3 meters height. Project Class 3B
laser light above eye level. Do not project Class 3B Laser light on specular material.
The entrance to area where Class3B laser is used should be posted with
appropriate warning signs.
This unit is intended for indoor use. Use of this unit outdoors voids all warranties.
Always refer service to a qualified technician. Never look directly into laser beam.
Occasional breaks are necessary to prevent breakdowns.
Caution - Use of controls or adjustments or performance of procedures other
than as specified herein may result in hazardous radiation exposure!
Set Up
Unpacking Magic Box Wide Beam comes with: 2 keys, 1 hanging bracket, 2
clamp levers, 2 washers, 1 power cord and 1 user manual. Unpack carefully and
be sure that no damage has occurred during shipping. If there is anything
missing or appear to be damaged please contact your dealer.
Power Connection Be sure the source voltage in your area matches the
required voltage for your Magic Box Wide Beam before plugging your unit in.
Incorrect voltage selection will detrimentally affect the operation of this product.
DMX Cable Connection Magic Box Wide Beam is a one-channel DMX fixture that
can be operated with universal DMX controller. This unit and DMX controller
require a standard 3-pin XLR connector for data input and data output.
Installation/Mounting Magic Box Wide Beam should be properly mounted by
using a suitable hanging clamp and safety cable. Use in a well-ventilated area.
Be sure no ventilation slots are blocked.
Specifications
Product Name Magic Box Wide Beam
Model No. AL10-05G
Laser Diode 4.9
Laser Color Green
Net Weight 4Kgs
Power AC 120V 50/60HZ
Classification 3R
Size (mm) L220 × W280 × H172
Fuse 20mm×2A
Housing Metal
Beam Divergence < 1.5 mrad
Operating temperature 18℃~25℃
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals