XL FRAMING 1200 PR-2970/PR-2970M This product manual contains important information about the safe installation and use of this projector
10/26 Pan and Tilt Pan and Tilt = X.X.X Power Board Power Board = X.X.X View DMX values DMX Channel 1=0 Factory Setup OFF Factory Setup Factory Set
11/26 ERROR MESSAGES In the course of launch, XL FRAMING 1200 examines automatically whether there are errors and if there are, it will display inf
12/26 DMX PROTOCOL Short mode Standard mode Extended mode FUNCTION DMX DESCRIPTION 000-010 Black 011-025 Open 026-225 Strobe speed from slow to
13/26 140-145 Rainbow rotation speed 3 146-151 Rainbow rotation speed 4 152-157 Rainbow rotation speed 5 158-163 Rainbow rotation speed 6 164-169
14/26 196-198 Gobo 3 shake 1(slowest) 199-201 Gobo 3 shake 2 202-204 Gobo 3 shake 3 205-207 Gobo 3 shake 4(fastest) 208-210 Gobo 4 shake 1(slowe
15/26 240-247 Rotation speed 7 248-255 Rotation speed 8 (fastest) 13 19 Gobo rotation Fine 000-255 Gobo rotation in 16 Bit precision 13 14 20
16/26 224-231 Rotation speed 5 232-239 Rotation speed 6 240-247 Rotation speed 7 248-255 Rotation speed 8 (fastest) 24 25 40 Focus 000-255 Linear
17/26 LED INDICATION On DMX signal OK Off No DMX signal Green Flash DMX signal error Yellow On Setting the panel Blue On Power Red Running self tes
18/26 TROUBLESHOOTING PROBLEM ACTION The projector doesn’t switch on ¾ Check the fuse on the power socket. ¾ Replace the lamp. The lamp comes on
19/26 TECHNICAL DATA VOLTAGES: Electronical ballast(PR-2970): 100V/120V/200V/220V/230V/240V AC,50/60Hz Magnetic ballast(PR-2970M): 230V AC,50/60Hz
2/26 INDEX SAFE USAGE OF THE PROJECTOR 3 INSTALLING THE PROJECTOR 4 FITTING THE LAMP 4 POWER SUPPLY – MAINS 5 CONTROL CONNECTIONS 5 DMX TERMINATOR
20/26 PRISM/ FROST: 1x linear lens, 1x3 facet prism, indexable, bi-directionally rotatable at variable speeds. Frost linearly adjustable 0-100%
21/26 SIZES: See at below 548755448238453535505 LIGHT OUTPUT: 2325026901.0753.0316m12° DIAMETER (m)DISTANCE (m)00020m12°( lux)8m8m0m16m12m4m12
SENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MOTOR6SLAVE #1 PCBSENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR2 MOTOR3 MOTOR4 MOTOR5 MO
SENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR 2 MOTOR3 MOTOR 4 MOTOR 5 MOTOR 6SLAVE #1 PCBSENS1SENS2SENS3SENS4SENS5SENS6MOTOR1 MOTOR 2 MOTOR3 MOTOR 4 MOT
24/26 COMPONENT ORDER CODES NAME PART NO. QUANTITY REMARK POWER SUPPLY 190010098 1 24V POWER SUPPLY 190010099 1 12V MAINS FILTER 193020008
26/26 PR LIGHTING LTD. 1582 Xingye Avenue, Nancun Panyu Guangzhou, 511442 China TEL: +86-20-3995 2888 FAX: +86
3/26 SAFE USAGE OF THE PROJECTOR When unpacking and before disposing of the carton check there is no transportation damage before using the project
4/26 INSTALL THE PROJECTOR (2PCS)(2PCS)HANDLES(2PCS)SAFETY CORDCLAMPS To pass 2 SAFETY CORDSthrough 4 HOLES for safety!WARNING257106 Take 2 clamps
5/26 POWER SUPPLY-MAINS Connect the power cord as follows: L (live) =brown E (earth) =yellow/green N (neutral) =blue Use the plug provided to conne
6/26 DMX TERMINATOR In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This preven
7/26 Press button ENTER to confirm; In the same time. The GREEN LED will flash one time. It means the setting has been enabled. Press button FUNC,
8/26 OPERATION MENU 1st LEVEL 2nd LEVEL 3rd LEVEL 4th LEVEL PR LIGHTING XL SERIES XL FRAMING 1200 DMX Address=001 DMX Address DMX Addres
9/26 CMY Invert OFF CMY Invert CMY Invert ON CTO Invert OFF CTO Invert CTO Invert ON Defaults OFF Defaults Defaults Restore Defaults Display On
Comments to this Manuals