StarBrite StarBrite Controller PR-8710 PR-8710C This product manual contains important information about the safe installation and use of this
10/16 241-255 Strobe, from slow to fast 000-240 Dimming, from dark to light 21 Blue 241-255 Strobe, from slow to fast 000-240 Dimming, from dark
11/16 LED INDICATION On Power on Green Off Power off On DMX signal OK Yellow Off No DMX signal MAINTENANCE When a LED StarBrite is used or stored
12/16 TECHNICAL DATA VOLTAGES: LED StarBrite Controller : 85V~132V/170V~264V AC,50/60Hz LED StarBrite : 10V~15V DC POWER CONSUMPTION: LED StarBrit
14/16 COMPONENT ORDER CODES NAME PART NO. QUANTITY REMARK POWER SOCKET 210020012 1 PST-101 10A/250V POWER SWITCH 190010009 1 Red ,with indicat
15/16
16/16 PR LIGHTING LTD. PR New Hi-tech Science Park, 1582 Xingye Avenue Nancun Panyu, Guangzhou, 511442 China TE
2/16 INDEX SAFE USAGE OF THE PRODUCT 3 INSTALLING THE PRODUCT 4 POWER SUPPLY – MAINS 4 CONTROL CONNECTIONS 4 DMX TERMINATOR 6 SETUP OPTIONS-PRODUCT
3/16 SAFE USAGE OF THE PRODUCT When unpacking and before disposing of the carton, check there is no transportation damage before using the product.
4/16 INSTALL THE PRODUCT When a LED StarBrite is used, it should be installed as the figure below on the left. Thrill through the eyelets on four fr
5/16 Connection between a LED StarBrite and a LED StarBrite Controller must be made with a special 5-pin signal connection cable with a length of 15 m
6/16 DMX TERMINATOR In the DMX control mode, for the last LED StarBrite Controller in the chain, the DMX OUT port has to be connected with a DMX ter
7/16 OPERATION MENU Menu Description PROGRAM 1 Speed[XX] Save PROGRAM 2 Speed[XX] Save PROGRAM 3 Speed[XX] Save PROGRAM 4
8/16 TO SET THE DMX START ADDRESS When a console is used to control several LED StarBrite Controllers, so that to control more LED StarBrites, each LE
9/16 DMX PROTOCOL CHANNEL FUNCTION DMX DESCRIPTION 000-240 Dimming, from dark to light 1 Red 241-255 Strobe, from slow to fast 000-240 Dimming
Comments to this Manuals