SOLO 575PR-2585This product manual contains important information about the safe installation and use of this projector. Please read and follow these
ACCESS SELF-TEST MODEEXIT SELF-TEST MODE AND RESETSELF-TEST MODE (Default:OFF)INFORMATION MENUDISPLAY LAMP'S USING TIME OR SET TO 0DISPLAY TEMPE
ROTATING GOBOROTATED GOBO WHEELSPRINGROTATED GOBO WHEELGOBO HOLDERGOBORETAINING SPRINGLock Tilt.Free 2 latch catches on the cover and slip off the fro
The SOLO 575 uses 14 DMX channels. They are listed in the following table.Channel Function DMX Value Description1 Strobe 000-009Blackout010-020Open021
7 Colour Wheel 000-016White. Note: stay 5 seconds while DMX value is 5, 6or 7, the function reset perform017-024White/colour filter 1 025-032Colour
9 Gobo Rotation000-120(Rotating gobo) 0~540º index121-127(Rotating gobo) Rotation speed 1(slowest)128-135(Rotating gobo) Rotation speed 2136-143(Rotat
Any maintenance work should only be carried out by qualified technicians.To ensure the continuous rotation of the rotating gobos and linear motion of
LIGHT OUTPUT27° DIAMETER (m)1093060201.2752.404m14° DIAMETER (m)DISTANCE (m)0005m14° ( lux)2m2m0m4m3m1m3m1m5m27° ( lux)3.82157.202.544.80105.099.602
VOLTAGES: 100/120/200/220/230/240V AC, 50Hz or 60Hz to orderPOWER CONSUMPTION: 650WLAMP: Type: Philips MSR 575/2 discharge lampColour Temperature: 7
200/220/230/240V:38.6Kg 100/120V:41.6KgSIZES: Solo 575 Manual_en.doc18/24
Solo 575 Manual_en.doc19/24ELECTRICAL DIAGRAM
SAFE USAGE OF THE PROJECTOR 3INSTALLING THE PROJECTOR 4FITTING THE LAMP 4POWER SUPPLY – MAINS 5CONTROL CONNECTIONS 5DMX TERMINATOR 6SETUP OPTIONS-PROJ
FAN1FAN2FAN3FAN4FULLFULL3/4 POWER1/2 POWERGNDPOWERBOX FANGNDPOWERFEEDBACK24VACGNDGNDVCCVCCDMX-SENS1DMX-SENS2H2H3H4H5H6H7H8H9H10TO BALLASTFREQUENCY SEL
NAME PART NO. REMARKTRANSFORMER040030053 220/230V040030052 100/120V040030051 200/245VTHERMOSTAT190010035 KSD020 120 /15A/250V℃CAPACITOR140010043 70µF/
To be carried out by qualified engineers onlyThe power input settings of the SOLO 575 may be changed to suit the supply in your area that the unit is
PR LIGHTING LTD.No. 571, Yingbin Road, Dashi, Panyu, Guangzhou, ChinaPost-Code: 511430TEL: +86-20-8478 1888FAX: +86-20-8478 6023P/N: 321010228Last Rev
Solo 575 Manual_en.doc24/24
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTORG clamps (2 PCS)XLR cable with 3-pin plug and socket (1 PCS)Safety cords (2 PCS)Spare gobos (3 PCS)T
When unpacking and before disposing of the carton check there is no transportation damage before using the projector. Should there be any damage cause
To pass 2 SAFETY CORDSthrough 4 HOLES for safety!WARNINGHOLESAFETYCORD106256 To pass 2 SAFETY CORDSthrough 4 HOLES for safety!WARNINGHOLESAFETYCORDTa
Connect the power cord as follows:L (live) =brownE (earth) =yellow/greenN (neutral) =blueUse the plug provided to connect the mains power to the proje
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents electrical noise fro
Launch the projector. Press button ENTER more than 5 seconds to unlock panel.Press button FUNC to ;Press button ENTER, it will display address; Press
RESERVEDRESERVEDSET ADDR. (Default: 001)ADDR. 001RESET MENURESET OR NOTMODE MENU ( Defaut: dMX)DMX CONTROLLER MODECONFIG. MENUSET DMX EXT. CHANNEL (De
Comments to this Manuals