MOON Halogen PR-2035H This product manual contains important information about the safe installation and use of this projector. Please read a
Moon-halogen manual.doc 10/14 Carefully lift off the upper cover by undoing the 4 M4 screws. Using a small screwdriver remove the gobo retaining
Moon-halogen manual.doc 11/14 PROBLEM RESOURCE The projector does not start Check the fuse on the socket is blown or not. Check if the lamp is go
Moon-halogen manual.doc 12/14 ELECTRICAL DIAGRAM
Moon-halogen manual.doc 13/14 COMPONENT ORDER CODES NAME PART NO. REMARK TRANSFORMER 040020036 230V/50Hz THERMOSTAT 190010054 95℃/10A FAN 030
Moon-halogen manual.doc 14/14 PR LIGHTING LTD. Yingbin Road, Dashi, Panyu, Guangzhou, China Post-Code: 511430 TE
Moon-halogen manual.doc 2/14 SAFE USAGE OF THE PROJECTOR 3 INSTALLING THE PROJECTOR 4 FITTING THE LAMP 4 POWER SUPPLY – MAINS 5 CONTROL CONNECTI
Moon-halogen manual.doc 3/14 The following points are important for safety as well as for the smooth installation and performance of the unit When
Moon-halogen manual.doc 4/14 This unit has been designed to be hung. Mount the bracket provided on the body of the projector by 2 M8 knobs provid
Moon-halogen manual.doc 5/14 Use the plug provided to connect the mains power to the projector paying attention to the voltage and frequency marke
Moon-halogen manual.doc 6/14 5-PIN AND 3-PIN CONVERSION MOON uses 3-pin XLR plug / socket. If your controller uses 5-pin XLR plug / socket, you shoul
Moon-halogen manual.doc 7/14 DMX CONTROL CHANNEL FUNCTIONS The MOON uses 7 channels with standard DMX 512 protocol. They are listed in the following
Moon-halogen manual.doc 8/14 SETUP OPTIONS - PROJECTOR CONFIGURATION To browse through the various Setup Options, press the FUNC button consecut
Moon-halogen manual.doc 9/14 TO SET THE DMX START ADDRESS The display shows the DMX start address after the projector is switched on (if you have al
Comments to this Manuals