MIRAGE PR-2014H This product manual contains important information about the safe installation and use of this projector. Please read and fol
2/8 Introduction Thank you for purchasing our product Mirage PR-2014H. Please read this manual carefully before you start to use this apparatus, tha
3/8 Accessories ● Power cord (1 PCS) ● XLR Plug (1 PCS) ● XLR Socket (1 PCS) ● This manual (1 PCS) Operation ● The apparatus is for indoor use only.
4/8 ● In the Master/Slave mode, all the luminaires may be actived by sound via the MIC inside the master. All luminaires will change synchronously c
5/8 avoid the reflection during the DMX-512 signal transmission. (Please refer to appendix 3: terminator connection) ● mirage PR-2014H adopts 3-pin X
6/8 Appendix 1: Table for setting address of DIP switch (for the controller mode) The following table lists the setting codes of the address of the
7/8 Appendix 2 CONVERSION BETWEEN 3-PIN AND 5-PIN XLR SOCKETS Canon 3-PIN DMX512 CONNECTION Pin1=Screen
8/8 Appendix 3 TERMINATOR CONNECTION PR LIGHTING LTD. Add: Yingbin Road, Dashi, Panyu, Guangzhou ,China Post-Code:511430
Comments to this Manuals